page_banner

products

LOWCELL O polyethylene(PE)foam board 5mm/7mm/10mm/12mm

Short Description:

Lowcell O is a supercritical non crosslinking extruded foamed high-density polyethylene sheet with independent bubble structure. The foaming ratio is 2 times, the density is 0.45-0.55g/cm3, and the thickness is 5mm/7mm/10mm/12mm. It is a polyolefin foaming material with nearly perfect performance. Compared with polypropylene sheet with the same foaming ratio, foamed high-density polyethylene has higher strength and hardness, which makes it have better rigidity and compression resistance. At the same time, compared with other traditional materials, it also has a certain degree of lightweight and buffer protection. The higher density makes it have better nail-holding ability, and it will be more durable if screw connection processing is required. At the same time, compared with polypropylene, polyethylene has superior weather resistance and low temperature resistance, which is suitable for more extensive outdoor or low-temperature applications.


Product Detail

Product Tags

Where is the 5mm/7mm/10mm/12mm Lowcell O board used?

It is mainly exported to Japan and applied to the material boxes on the SPS of the intelligent mobile material truck used in the industrial assembly line, as well as the load bearing partition for heavy industrial parts turnover packaging and etc.

 

What about the packaging of 5mm/7mm/10mm/12mm Lowcell O boards?

The regular colors are dark blue/green/yellow, and other colors can also be customized. Normal size is 1000 * 2100mm. Conventional packaging is that several sheets are packed with plastic film first, and then palletized.

 


  • Previous:
  • Next:

  • Write your message here and send it to us