page_banner

products

  • LOWCELL U polypropylene(PP) foam borad for radome

    LOWCELL U polypropylene(PP) foam borad for radome

    Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.

  • LOWCELL polypropylene(PP) foam board cover plate 10.0mm

    LOWCELL polypropylene(PP) foam board cover plate 10.0mm

    Lowcell is a supercritical non-crosslinked extruded foamed polypropylene sheet with closed-cell independent cell structure.  2 times the expansion ratio, density 0.45-0.5g/cm3, thickness 10mm. It is an ultra-thick polypropylene foam board with near-perfect performance. Compared with polypropylene board with the same expansion ratio, foamed high-density polypropylene has higher strength and hardness, making it have better rigidity and compression resistance. We live in a dusty environment. Dust is everywhere and can accumulate inside the equipment, or in the turnover boxes of the parts production workshop, etc., negatively affecting its performance and lifespan. In order to solve this problem, we developed this 10mm PP foam board cover, which is a very simple and effective protection measure to isolate dust and dirt from the outside world. You can use our products with confidence.

  • LOWCELL polypropylene(PP) foam sheet material box assembled by fasteners

    LOWCELL polypropylene(PP) foam sheet material box assembled by fasteners

    Material boxes are commonly used in factories.Mostly use polypropylene(PP)foam sheet(expanded 2 times) as Material box. Harder than 3 times foamed board.Because the sheet is closed cell foam extrusion,so it is not easy to accumulate ash.The material box made of polypropylene(PP) foam sheet will be lighter.This is its advantage.The connecting fastener used in the material box was designed by our company.At present, the fastener is more suitable for board with a thickness of 4-5mm, the most used thickness for making material boxes.Our polypropylene(PP) foam sheet can make many kinds of boxes.