-
ODM Manufacturer Omni Fiberglass Antenna 5g Wireless Communication Antenna
Lowcell T is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density 0.45-0.5g/cm3 and thickness is 1mm. At the same time, our boards also have different thicknesses of 1-10mm to choose from. It is the best choice of inner core material for the new 5g communication radome to reduce weight and cost. While reducing the weight of radome and material and transportation cost, polypropylene has its own low dielectric constant and does not affect the transmission of communication signal.
-
High reputation Black Plastic PS Rigid Rolls Sheet Film Polystyrene Mirror Sheet
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure.The foaming rate is 3 times, and density is 0.4-0.45g/cm3.The thickness specification 3-5mm, different thickness for selection. Compared with the traditional solid polyethylene blister tray, it has many obvious advantages.
-
Massive Selection for Conductive Black HIPS Sheet for Electronic Tray Packaging
Material boxes are commonly used in factories.Mostly use polypropylene(PP)foam sheet(expanded 2 times) as Material box. Harder than 3 times foamed board.Because the sheet is closed cell foam extrusion,so it is not easy to accumulate ash.The material box made of polypropylene(PP) foam sheet will be lighter.This is its advantage.The connecting fastener used in the material box was designed by our company.At present, the fastener is more suitable for board with a thickness of 4-5mm, the most used thickness for making material boxes.Our polypropylene(PP) foam sheet can make many kinds of boxes.
-
100% Original Csp Eco-Friendly High Quality Crossed-Linked PE Foam Sheet with Customized Size
LOWCELL polypropylene(PP) foam sheet is Carbon dioxide（CO2） SCF non-crosslinked with closed cell foam extrusion.This is better multi-purpose materials. The foam sheet is lighter, higher strength, fully recyclable,smooth surface and low VOC. Mostly use polypropylene(PP)foam sheet(expanded 3 times) as packaging inner material.The product lineup offers greater benefits by using the general-, antistatic- and conductive-grade products according to the usage environment.According to your needs, we can customize any shape of partition materials.Colors can also be customized.
-
OEM Supply Radiator Inlet and Outlet
Lowcell H is a supercritical SCF non-crosslinked extruded foamed polypropylene(PP) or Polyethylene(PE) board with independent bubble structure.1.3 times foaming rate, density is 0.6-0.67g/cm3. It is made by CO extrusion and has a special three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface pressed leather lines have the effect of skid resistance. The middle layer is black low expanded foam, it not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
Special Design for Fairytale Castle Sand Pit Children Indoor Playground
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure.The foaming rate is 3 times, and density is 0.4-0.45g/cm3.The thickness specification 3-5mm, different thickness for selection. Compared with the traditional solid polyethylene blister tray, it has many obvious advantages.
-
Hot New Products PVC Foam Board Competetive Price Chinese Manufacturer
Lowcell O is a supercritical non crosslinking extruded foamed high-density polyethylene sheet with independent bubble structure. The foaming ratio is 2 times, the density is 0.45-0.55g/cm3, and the thickness is 5mm/7mm/10mm/12mm. It is a polyolefin foaming material with nearly perfect performance. Compared with polypropylene sheet with the same foaming ratio, foamed high-density polyethylene has higher strength and hardness, which makes it have better rigidity and compression resistance. At the same time, compared with other traditional materials, it also has a certain degree of lightweight and buffer protection. The higher density makes it have better nail-holding ability, and it will be more durable if screw connection processing is required. At the same time, compared with polypropylene, polyethylene has superior weather resistance and low temperature resistance, which is suitable for more extensive outdoor or low-temperature applications.
-
Factory making High Density Polyethylene HDPE Sheet, High Impact 1 2mm China PP PS Plate Price, ABS Plastic Sheet for Vacuum Forming
Lowcell H is a supercritical SCF non-crosslinked extruded foamed polypropylene(PP) or Polyethylene(PE) board with independent bubble structure.1.3 times foaming rate, density is 0.6-0.67g/cm3. It is made by CO extrusion and has a special three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface pressed leather lines have the effect of skid resistance. The middle layer is black low expanded foam, it not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
2019 High quality China Hot Sale EVA Foam Sheet Used in Orthopedic and Prosthetic Applications
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 3 times, the density is 0.35-0.45g/cm3, and the thickness specification varies from 3mm、 5mm and 10mm according to the application occasion. It can be used as the core material and surface protective backing board of multi-layer composite buffer material for high demand packaging pallets of liquid crystal glass semi-finished products and finished products.
-
Factory Selling China Kingstar WPC Foam Sheet Wood Plastic Board Building Material
Lowcell H is a carbon dioxide non-crosslinked extruded foamed polypropylene or polyethylene board with closed cell bubble structure.1.3 times of foaming ratio, density 0.6-0.67g/cm3, thickness 2-3mm. It is made by coextrusion in the cavity of the machine die head and has a three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface is pressed with leather lines, which has the effect of anti-skid.. The middle layer is black low expanded foam, It not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
High reputation China Custom Design Foam Printed Outdoor Advertising Yard Sign Boards
Lowcell H is a supercritical SCF non-crosslinked extruded foamed polypropylene(PP) or Polyethylene(PE) board with independent bubble structure.1.3 times foaming rate, density is 0.6-0.67g/cm3. It is made by CO extrusion and has a special three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface pressed leather lines have the effect of skid resistance. The middle layer is black low expanded foam, it not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
Reasonable price for China 2022 New Wholesale Self Adhesive Fiberglass Mesh Drywall Joint Fiber Tape for Gypsum Board Platerboard Crac
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure.The foaming rate is 3 times, and density is 0.4-0.45g/cm3.The thickness specification 3-5mm, different thickness for selection. Compared with the traditional solid polyethylene blister tray, it has many obvious advantages.
